BCYRZ - 745-758 GRAY 26493 ENAMEL ALKYD SEMI-GLOSS

  • MSDS: BCYRZ
  • Manufacturer: AMERON INDUSTRIAL COATINGS DIV
  • Product Name: 745-758 GRAY 26493 ENAMEL ALKYD SEMI-GLOSS
  • National Stock Number: 8010-00-104-8383
Product Identification

Product ID:745-758 GRAY 26493 ENAMEL ALKYD SEMI-GLOSS
MSDS Date:01/01/1985
FSC:8010
NIIN:00-104-8383
MSDS Number: BCYRZ

Responsible Party
AMERON INDUSTRIAL COATINGS DIVISION
201 N BERRY ST
BREA, CA 92621-3904
US

Emergency Phone: 714-529-4597

Info Phone: 714-529-4597

Cage: 09869

Contractor
AMERON INDUSTRIAL COATINGS DIVISION
BREA, CA 92621-3904 US

Telephone: 714-529-4597

Cage: 09869

Ingredients

ETHYL BENZENE (SARA III)

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: 1.4%

OSHA PEL 100 PPM/125 STEL

ACGIH TLV: 100 PPM/125STEL 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


VM&P NAPHTHA

RTECS: SE7550000

Fraction By Weight: 24.7%

ACGIH TLV: 200PPM


ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: 9.3%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)

CAS: 111-15-9

RTECS: KK8225000

Fraction By Weight: 0.5%

OSHA PEL S,100 PPM

ACGIH TLV: S, 5 PPM; 9192


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1.1%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:INHALATION: ANESTHETIC, IRRITATION OF
RESPIRATORY TRACT OR ACUTE NERVOUS SYSTEM DEPRESSION.

First Aid

First Aid:IN CASE OF CONTACT FLUSH SKIN AND EYES WITH PLENTY OF WATER
WHITE REMOVING CONTAMINATED CLOTHING. IF INHALED, REMOVE TO FRESH
AIR. CALL A PHYSICIAN IF SYMPTOMS PERSIST.

Fire Fighting

Flash Point:50F, T.C.C.
Lower Limits:0.9
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL; POLYMER FOAM FOR
LARGE FIRES
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS SHOULD BE
AVAILABLE
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD-UP.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. VENTILATE AREA. REMOVE WITH ERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGOF NFPA
CLASS ONE FLAMMABLE LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY. CONTAINERS SHOULD BE GROUNDED
WHEN POURING. AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES.
DO T FLAME CUT, BRAZE OR WELD COATED MATERIAL W/OUT RESPIRATOR.

Exposure Controls

Respiratory Protection:MECHANICAL FILTER OR CHEMICAL-MECHANICAL FILTER
TYPE RESPIRATOR
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST
Protective Gloves:REQUIRED
Eye Protection:SPLASH-PROOF EYEWEAR
Other Protective Equipment:PREVENT PROLONGED CONTACT TO CONTAMINATED
CLOTHING
Supplemental Safety and Health
P.O. BOX 2153/ WICHITA, KANSAS 67201

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:223-329F
Vapor Pres:>AI
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:58.4

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES, HEAT AND HOT SURFACES

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.